June 2024 - Dev - Freifunk Nordwest

Sign Request 20230421
by Jan-Tarek Butt 13 Feb '25

13 Feb '25

Moin Moin, Ich habe heute eine neue Firmware gebaut. Basisdaten: * Firmware-Version: 20230421 * Gluon-Version: v2022.1.x * Commit ID: e9dcefee596fdc840ed23313286874879d4bc2d1 * Download: https://firmware.ffnw.de/l2tp/20230421/ Folgende Gluon spezifischen Änderungen gab es unter anderen: #################### Release Gluon 2022.1 #################### Upgrades to v2022.1 and later releases are only supported from releases v2020.1 and later. This is due to migrations that have been removed to simplify maintenance. https://gluon.readthedocs.io/en/latest/releases/v2022.1.html ###################### Release Gluon 2022.1.1 ###################### This release mitigates multiple flaws in the Linux wireless stack fixing RCE and DoS vulnerabilities. https://gluon.readthedocs.io/en/latest/releases/v2022.1.1.html ###################### Release Gluon 2022.1.2 ###################### Contains various bugfixes only. https://gluon.readthedocs.io/en/latest/releases/v2022.1.2.html ###################### Release Gluon 2022.1.3 ###################### Fix boot hang on various Unifi-AC devices https://gluon.readthedocs.io/en/latest/releases/v2022.1.3.html Added hardware support: ####################### ath79-generic: * D-Link DAP-2660 A1 * Enterasys WS-AP3705i * Siemens WS-AP3610 * TP-Link: Archer A7 v5 CPE510 v2 CPE510 v3 CPE710 v1 EAP225-Outdoor v1 WBS210 v2 ath79-mikrotik: * Mikrotik RB951Ui-2nD ipq40xx-generic: * GL.iNet GL-AP1300 * Aruba Networks: AP-303H AP-365 * AVM FRITZ!Box 7520 (v1) InstantOn AP11D InstantOn AP17 ipq40xx-mikrotik: Mikrotik: * hAP ac2 * SXTsq-5-AC ramips-mt7620: * Xiaomi Mi Router 3G (v2) ramips-mt7621: * Cudy WR2100 * D-Link DAP-X1860 (A1) * GL.iNet GL-MT1300 * Mercusys MR70X (v1) * Netgear: R6260 WAC104 WAX202 * TP-Link: RE500 RE650 v1 * Ubiquiti UniFi 6 Lite * Xiaomi Mi Router 4A (Gigabit Edition) * ZyXEL NWA50AX ramips-mt7622: * Linksys E8450 * Xiaomi AX3200 * Ubiquiti UniFi 6 LR ramips-mt76x8: * GL.iNet microuter-N300 * Netgear R6020 * RAVPower RP-WD009 * TP-Link: Archer C20 v4 Archer C20 v5 RE200 v2 v3 RE305 v1 * Xiaomi: Mi Router 4C Mi Router 4A (100M Edition) rockchip-armv8: * FriendlyElec: NanoPi R2S NanoPi R4S (4GB LPDDR4) mpc85xx-p1010: * TP-Link TL-WDR4900 (v1) * Sophos RED 15w rev. 1 mpc85xx-p1020: * Extreme Networks WS-AP3825i lantiq-xrx200: * AVM FRITZ!Box 7360 (v2) * TP-Link - TD-W8970 (v1) realtek-rtl838x * D-Link DGS-1210-10P (F1) Removed Devices ############### This list contains devices which do not have enough memory or flash to be operated with this Gluon release. * D-Link DIR-615 (C1, D1, D2, D3, D4, H1) * Linksys WRT160NL * TP-Link: TL-MR13U (v1) TL-MR3020 (v1) TL-MR3040 (v1, v2) TL-MR3220 (v1, v2) TL-MR3420 (v1, v2) TL-WA701N/ND (v1, v2) TL-WA730RE (v1) TL-WA750RE (v1) TL-WA801N/ND (v1, v2, v3) TL-WA830RE (v1, v2) TL-WA850RE (v1) TL-WA860RE (v1) TL-WA901N/ND (v1, v2, v3, v4, v5) TL-WA7210N (v2) TL-WA7510N (v1) TL-WR703N (v1) TL-WR710N (v1, v2) TL-WR740N (v1, v3, v4, v5) TL-WR741N/ND (v1, v2, v4, v5) TL-WR743N/ND (v1, v2) TL-WR840N (v2) TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12) TL-WR841N/ND (v1, v2) TL-WR843N/ND (v1) TL-WR940N (v1, v2, v3, v4, v5, v6) TL-WR941ND (v2, v3, v4, v5, v6) TL-WR1043N/ND (v1) * Ubiquiti: AirGateway AirGateway Pro AirRouter Bullet LS-SR71 Nanostation XM Nanostation Loco XM Picostation * Unknown A5-V11 * VoCore VoCore (8M, 16M) Atheros target migration ######################## All Atheros MIPS devices built with the ar71xx-generic, ar71xx-nand as well as ar71xx-tiny were deprecated upstream and are therefore not available with Gluon anymore. Many devices previously built with ar71xx-generic and ar71xx-nand are now available with the ath79-generic as well as ath79-nand target respectively. Features ######## WireGuard ######### Gluon got WireGuard support. This allows offloading encrypted connections into kernel space, increasing performance by forwarding packets without the need for context switches between user and kernel space. In order to reuse existing (already verified) fastd-keypairs for WireGuard, a key derivation procedure is currently being developed [0]. This should ease migration from fastd to WireGuard in case whitelisting VPN keys is desired. fastd L2TP ########## fastd can now act as a connection broker for unencrypted L2TP-based tunneling within Gluons mesh-vpn framework. This new null@l2tp connection method allows for increased performance within existing fastd setups. In addition to a sufficiently configured fastd-based VPN server [1], this requires further modifications to a sites VPN fastd methods[2]. Major changes ############# OpenWrt ####### This release is based on the newest OpenWrt 22.03 release branch. It ships with Linux kernel 5.10 as well as wireless-backports 5.15. Network changes (DSA / Upgrade-Behavior) ######################################## The ramips-mt7621 and lantiq-xrx200 targets now use the upstream DSA subsystem instead of OpenWrt swconfig for managing ethernet switches. Gluon detects the existing user-intent and automatically applies it over to DSA syntax. See the section about network reconfiguration for more details. System reconfiguration ###################### The network and system-LED configurations are now re-generated after each update / invocation of gluon-reconfigure. The user-intent is preserved within Gluon’s implemented functionality (Wired-Mesh / Client access / WAN). As an additional feature, Gluon now supports assigning roles to interfaces. This behavior is explained here [3]. Site changes ############ VPN provider MTU ################ To account for multiple VPN methods available for a site, the MTU used for the VPN tunnel connection is now moved to the specific VPN provider configuration. For fastd this means that mesh_vpn.mtu needs to be moved to mesh_vpn.fastd.mtu [4]. Preconfigured Interfaces Roles ############################## Instead of mesh_on_wan and mesh_on_lan there is now an interfaces block to configure the default behavior of network interfaces. Details can be found in the documentation [5]. Minor changes ############# * The brcm2708-bcm2708 brcm2708-bcm2709 brcm2708-bcm2710 targets were renamed to bcm27xx-bcm2708 bcm27xx-bcm2709 and bcm27xx-bcm2710 * The GL.iNet GL-AR750S was moved to the ath79-nand subtarget *Gluon now ships the ath10k-ct firmware derivation for QCA9886 / QCA9888 / QCA9896 / QCA9898 / QCA9984 / QCA9994 / IPQ4018 / IPQ4028 / IPQ4019 / IPQ4029 radios [6] * WolfSSL instead of OpenSSL is now used when built with WPA3 support * The option to configure the wireless-channel independent from the site-selected channel was moved from gluon-core.wireless.preserve_channels to gluon.wireless.preserve_channels * gluon-info is a new command that provides information about the current node * GLUON_DEPRECATED is now set to 0 by default * To reboot a running gluon-node into setup-mode, Gluon now offers the gluon-enter-setup-mode command * Devices without WLAN do not show the private-wifi configuration anymore * The Autoupdater now uses the site default branch in case it is configured to use a non-existent / invalid branch Bugfixes ######## * Fixes security issues in WolfSSL [13]. People who have installed additional, non-Gluon packages which rely on WolfSSL’s TLS 1.3 implementation might be affected. Firmwares using either gluon-mesh-wireless-sae or gluon-wireless-encryption-wpa3 are unaffected by these issues, since only WPA-Enterprise relies on the affected TLS functionality. CVE-2022-38152 CVE-2022-39173 * Fixes the update path for GL-AR300M and NanoStation Loco M2/M5 (XW) devices. * Various build-errors which sporadically occur when building with a large thread-count have been fixed * Android devices do not lose their IPv6 connectivity after extended idle-time * The 802.11s mesh network is now using 802.11ax HE-modes when supported by hardware * Ipq40xx Wave2 devices temporarily use non-ct firmware again to work around 802.11s unicast package loss in ath10k-ct [7] * Modify kernel builds slightly to work around a boot hang on various devices based on the QCA9563 SoC - especially the Unifi AC-* devices [14] * Work around an issue with wifi setup timing by waiting a bit while device initialisation is ongoing [15] Known issues ############ * Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well [8]. * The integration of the BATMAN_V routing algorithm is incomplete. ** Mesh neighbors don’t appear on the status page [9]. Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric. **Throughput values are not correctly acquired for different interface types [10]. This affects virtual interface types like bridges and VXLAN. * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown [11]. Reducing the TX power in the Advanced Settings is recommended. * In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled [12]. This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed). Missing devices ############### The following devices have not yet been integrated into Gluons ath79 targets. * 8Devices Carambola 2 * Aerohive HiveAP 121 * Allnet ALL0315 * Buffalo: WZR-HP-G300NH2 WZR-HP-G450H * GL.iNet 6408A v1 WNDRMAC WNDRMAC v2 * TP-Link WR2543 * Ubiquiti Rocket * WD: MyNet N600 MyNet N750 * ZyXEL: NB6616 NB6716 Folgende zusatzliche änderungen auf Gluon v2023.1.3 kommen dazu: ################################################################ * modules: update openwrt * modules: update packages * modules: update routing * ath79-generic: remove workaround Now that OpenWrt implements a proper fix for the stalled boots on 74kc boards, the previous workaround can be removed. * ath79-generic: fix WS-AP3705i autoupdater name (#2819) It appears that the autoupdater name wasn't correct and devices therefore don't receive updates. * ipq40xx: use ath10k-smallbuffers for ZyXEL WRE6606 (#2843) The WRE6066, has in contrast to other ip40xx devices, has only 128MB system RAM. This results in OOM situations and instability, to circumvent this we need to use ath10k-smallbuffers. Die upstream Änderungen findet ihr hier: https://github.com/freifunk-gluon/gluon/compare/43954dd1652b44ed0618c98e44f… Folgende Comunnity spezifischen Änderungen gab es im siteconf repo: * Der Firmware signatur schlüssel von Florian Lottes wurde hinzugefügt. * In allen Domains wurde die next_node mac 16:41:95:40:f7:dc hinzugefügt. * In der site.conf wurden die interface rollen lan, wan und single hinzugefügt. Die Änderungen an der Siteconf können im Siteconf-Repo hier eingesehen werden: https://git.ffnw.de/ffnw-firmware/siteconf/-/compare/rc%2F20220608...rc%2F2… Ich bitte euch die Änderungen zu prüfen und die Firmware im Anschluss zu signieren. Die Dokumentation zum Signaturprozess findet ihr im Wiki unter: https://wiki.ffnw.de/Firmware/Releaseprozess#Firmware_signieren Ein Script zum vereinfachten signieren findet ihr hier: https://git.ffnw.de/lrnzo/firmware-signing-made-easy [0] https://github.com/freifunk-gluon/gluon/pull/2601 [1] https://gluon.readthedocs.io/en/latest/features/vpn.html#vpn-gateway-config… [2] https://gluon.readthedocs.io/en/latest/features/vpn.html#vpn-fastd-methods [3] https://gluon.readthedocs.io/en/latest/features/wired-mesh.html#wired-mesh-… [4] https://github.com/freifunk-gluon/gluon/pull/2352 [5] https://gluon.readthedocs.io/en/latest/user/site.html#user-site-interfaces [6] https://github.com/freifunk-gluon/gluon/pull/2541 [7] https://github.com/freifunk-gluon/gluon/issues/2692 [8] https://github.com/freifunk-gluon/gluon/issues/1937 [9] https://github.com/freifunk-gluon/gluon/issues/1726 [10] https://github.com/freifunk-gluon/gluon/issues/1728 [11] https://github.com/freifunk-gluon/gluon/issues/94 [12] https://github.com/freifunk-gluon/gluon/issues/496 [13] https://openwrt.org/releases/22.03/notes-22.03.1#security_fixes [14] https://github.com/freifunk-gluon/gluon/issues/2784 [15] https://github.com/freifunk-gluon/gluon/issues/2779 Viele Grüße Jan-Tarek Butt

6 25

Sign Request 20240617
by Jan-Tarek Butt 07 Feb '25

07 Feb '25

Moin Moin, Ich habe heute eine neue Firmware gebaut. Basisdaten: * Firmware-Version: 20240617 * Gluon-Version: v2023.2.x * Commit ID: f0edc3eca7e9d91c53e4b64153cc94e000f9f06d * Download: https://firmware.ffnw.de/l2tp/20240617/ Folgende Gluon spezifischen Änderungen gab es unter anderen: ############################## Gluon 2022.1.x minjor changes ############################## mainly new added Hardware support. https://github.com/freifunk-gluon/gluon/compare/e9dcefee596fdc840ed23313286… #################### Release Gluon 2023.1 #################### Upgrades to v2023.1 and later releases are only supported from releases v2021.1 and later. This is due to migrations that have been removed to simplify maintenance. https://gluon.readthedocs.io/en/latest/releases/v2023.1.html ###################### Release Gluon 2023.1.1 ###################### Note: This release was found to be soft-bricking AVM Fritz!Box 7520 and 7530. We advice to not offer the release for these two devices until this gets fixed. Affected devices can be recovered to Fritz!OS and then reinstalled by using the (AVM Recovery Tool) https://gluon.readthedocs.io/en/latest/releases/v2023.1.1.html #################### Release Gluon 2023.2 #################### Deprecation of Tunneldigger VPN Tunneldigger is set to be removed from the Gluon base repository in the next major Gluon release. It is recommended to migrate to fastd or WireGuard. https://gluon.readthedocs.io/en/latest/releases/v2023.2.html ###################### Release Gluon 2023.2.1 ###################### new hardware support and Bugfixes https://gluon.readthedocs.io/en/latest/releases/v2023.2.1.html ###################### Release Gluon 2023.2.2 ###################### Contains various Bugfixes https://gluon.readthedocs.io/en/latest/releases/v2023.2.2.html ###################### Release Gluon 2023.2.3 ###################### Contains various Bugfixes https://gluon.readthedocs.io/en/latest/releases/v2023.2.3.html Diff from v2023.2.3 to v2023.2.x https://github.com/freifunk-gluon/gluon/compare/ec72498a44c66a512ceeb45d89c… Die Änderungen an der Siteconf können im Siteconf-Repo hier eingesehen werden: https://git.ffnw.de/ffnw-firmware/siteconf/-/compare/rc%2F20230421...rc%2F2… Ich bitte euch die Änderungen zu prüfen und die Firmware im Anschluss zu signieren. Die Dokumentation zum Signaturprozess findet ihr im Wiki unter: https://wiki.ffnw.de/Firmware/Releaseprozess#Firmware_signieren Ein Script zum vereinfachten signieren findet ihr hier: https://git.ffnw.de/lrnzo/firmware-signing-made-easy Viele Grüße Jan-Tarek Butt

2 1

Fwd: [freifunk-gluon/gluon] Release v2023.2.3 - v2023.2.3
by Jan-Tarek Butt 14 Jun '24

14 Jun '24

FYI: -------- Forwarded Message -------- Subject: [freifunk-gluon/gluon] Release v2023.2.3 - v2023.2.3 Date: Fri, 14 Jun 2024 10:27:11 -0700 From: David Bauer <notifications(a)github.com> Reply-To: freifunk-gluon/gluon <noreply(a)github.com> To: freifunk-gluon/gluon <gluon(a)noreply.github.com> CC: Subscribed <subscribed(a)noreply.github.com> https://gluon.readthedocs.io/en/v2023.2.x/releases/v2023.2.3.html -- View it on GitHub: https://github.com/freifunk-gluon/gluon/releases/tag/v2023.2.3 You are receiving this because you are subscribed to this thread. Message ID: <freifunk-gluon/gluon/releases/160541150(a)github.com>

1 0